Home Skinovations Silk'n Flash&Go Mode D'emploi page 16

Level 3 - both left and central indicator lights are steadily lit.
Level 4 - the left and central indicator lights are steadily lit and the right indicator light is blinking.
Level 5 (highest) - all 3 indicator lights are steadily lit.
Whenever Silk'n Flash&Go™ is turned on its energy level will automatically be reset to the lowest
energy level. Only one ENERGY LEVEL Indicator Light will be on.
To set the energy level, press the Energy Level Setting Buttons using "-" or "+" to respectively
decrease or increase the energy level.
The Skin Color Sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and
skin color changes (hyper- or hypo-pigmentation).
To prevent such misuse, a unique SKIN COLOR SENSOR in Silk'n Flash&Go™ measures the treated
skin complexion at the beginning of each session and occasionally during the session. If the SKIN
COLOR SENSOR detects a skin tone that is too dark for Silk'n Flash&Go™ application, the device will
automatically stop emitting pulses.
If you see no light pulse and the Skin Tone Warning Indicator Light blinks, this is an indication that
your skin tone, measured by the SKIN COLOR SENSOR, is too dark for safe application. Try using the
device on a different body part or contact the Silk'n Flash&Go™ support.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
If your skin blisters or burns, STOP USE IMMEDIATELY!
15