GE Cooktop Radiant Manuel D'utilisation Et Instructions D'installation page 19

INSTALLATION—ELECTRICAL CONNECTIONS
A When making the wire connections, use the
entire length of conduit provided. The conduit
must not be shortened.
With the cooktop in place, open the front of
B
the cabinet door.
C Insert the wires from the conduit through the
opening of the junction box.
Red
Ground
Connect the red and black leads from the
D
cooktop conduit to the corresponding leads
in the junction box.
Ground wire
location
Installation Instructions
Strain Relief Clamp
Black
Red
Black
E Once the connections are made, secure wires
together using wire nuts.
Ground
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is connected
to the cooktop frame. Effective January 1, 1996,
the National Electrical Code will not permit
grounding through neutral. If used in new
construction after January 1, 1996 or in a mobile
home, recreational vehicle or if local codes do not
permit grounding through the neutral white lead,
attach the appliance grounding lead (green or
copper) to the residence grounding conductor
(green or bare copper) in accordance with local
codes. When connecting to a 3 conductor branch
circuit, if local codes permit, connect the bare
ground connector lead of the cooktop to the
branch circuit neutral (gray or white in color).
IMPORTANT:
installed into a blind counter (one with no cabinet
opening below), wire connections must be made
before putting the cooktop into the cutout
opening.
19
Red
Strain Relief Clamp
Black
If the cooktop is being