Centaure ÉCHELLE TÉLESCOPIQUE BAMBOO Mode D'emploi page 14

Watch out for electricity; a ladder is a life-
threatening current conductor.
Never climb the top 3 rungs of the ladder. A ladder
without protruding ladder ends or a ladder,
in which some of the rungs at the top of the ladder
are still collapsed (telescopic ladder), requires
special attention and supervision to ensure that
the top metre thereof is not climbed.
5. Handling, storage and maintenance
a. This ladder is a precision product and should be
handled with care, stored under suitable conditions, and
maintained as fully functional so that it remains safe and
reliable.
b.Transport the ladder in a fully closed position and
carry it under your arm. Use one hand to hold one side
of the unlocking housing on the underside of rung 2,
take the ladder under your arm and hold it with the other
hand.
c. Open and close the ladder slowly and carefully.
d. Make sure that you do not bump into anything with
the ladder. If any of the stiles are dented or damaged,
the ladder will be difficult to open or close or may not
work at all.
e. Store the ladder fully closed and in a vertical position,
standing on both feet and leaning against a vertical
surface.
f. Always store the ladder in a dry place. Damp conditions
could have a detrimental effect on the condition and
functioning of this product.
Customer Service │www.centaure.fr │ CENTAURE │ 979 avenue de la gare │ 27610 Romilly sur Andelle
14
Do not place the ladder upside down and make
sure that the rungs are in the correct position for
use.
Do not lean the ladder against a post or tree.
Never place the ladder on a greasy or wet surface.
g. Keep the ladder clean. Clean the stiles every now
and then with a clean, dry cloth. Clean and dry the
product immediately after exposure to damp conditions
(e.g. rain). Paint or any other foreign materials could
hinder the telescopic function and must be removed
immediately.
h. If the telescopic function becomes stiff, first clean the
stiles with a clean,dry cloth and then apply a little silicon
spray and remove any excess with a cloth.
i. Replace worn out (or damaged) ladder feet and
wall bumpers with safety-grip before they become
completely worn.
For you own safety, please only use original spare parts.
j. With the exception of replacing ladder feet and wall
bumpers with safety-grip, you may not dismantle or
repair the product yourself. Contact customer service
in case of need.