Centaure ÉCHELLE TÉLESCOPIQUE BAMBOO Mode D'emploi page 29

2. User information telescopic ladder SPACE
BAMBOO
You are using a special and high-quality device, which must be used with care. Therefore, when using
this ladder, follow exactly the following step-by-step instructions as a fixed guide.
Before use, always mount the base crossbar. Therefore, follow the following instructions :
1 The accessories include 2 screws with washers pre-
assembled in the ladder stile, 1 aluminium base crossbar
and 2 anti-slip feet made of plastic with 2 screws, included
loose.
2 Loosen both screws.
3 Take them out of the ladder stile.
4 Attach the anti-slip feet at both ends of the aluminium
crossbar.
5 Fasten them using both loose screws.
6 Slide the aluminium crossbar with the two plastic feet
attached into the recesses on the bottom side of the
ladder stile. Check whether the feet with the ribbed anti-
slip profile are facing downward.
7 Tighten the two screws with the washers.
8 Check whether the screws on the other side are flush
with the ladder stile and are thus screwed completely
into the nut. The nuts are already pre-assembled in the
plastic end cap in the stile.
29