Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
②
③
④
1. Safety notes
To ensure safe and reliable work with the testing technology, the following points are to be
observed when using the testing unit:
•
•
•
•
•
•
•
①
⑨
The unit may only be operated only by trained specialists.
Prior to commissioning, perform a check to ensure that hydraulic hoses, seals and cou-
plings are in faultless condition. In the event of damage, do not commission the unit, but
instead ship it to the manufacturer for repair or replace damaged hydraulic hoses.
Exceeding the overload pressure can result in malfunctions and even in the destruction of
the testing unit.
Note the input and output of the hydraulic unit.
Failure to observe could result in damage to the testing unit and the hydraulic system.
Never kink or pinch lines!
Since the unit is sensitive to impacts, ensure that it is secure during operation.
Wear suitable protective clothing.
Side view of the display
⑫
⑬
⑧a
⑤
⑥
⑦
- 6 -
1
On/off switch
2
Flow indicator
3
Pressure indicator
4
Temperature indicator
5
Pressure sensor
6
Flow rate sensor
7
Temperature sensor
8a Hydraulic unit
8b Hydraulic block
9
Hydraulic input
10 Hydraulic output
11 Adjusting dial
12 Power cable
13 Sensor connections
⑩
⑧b
⑪
Publicité
Table des Matières
