Charge control and safety functions
four independent slots each equipped with cutoff and charge control
•
functions for better charge efficiency, extended lifetime for your batteries
without risk of overcharging or undercharging.
Automatic cutoff of the charging process after detection of :
minus-delta V (5mV) / zero delta V (30 min) / max V (1.55V)
•
max. battery or charger temperature.
•
Additional safety features
short circuit protection
•
reverse polarity protection (+) and (-)
•
defective and non-rechargeable battery detection.
•
Table with average charging time for various charging current
Comments regarding the chart below :
charging time depends on the capacity, age, brand of the battery and the
•
rate of the selected charging current.
the charging time is based on a full charge of empty batteries.
•
the default charging current is set at 200mA. A low current for extended
•
battery life.
battery sizes AA and AAA can be mixed in the charger.
•
Type
NiMH
batt.
AA/HR6
AAA/HR03
Type
NiMH
batt.
AA/HR6
AAA/HR03
Capacity
batt. in mAh
1100 - 1300
1400 - 1700
1800 - 2000
2100 - 2800
650 - 800
850 - 1100
Capacity
batt. in mAh
1100 - 1300
1400 - 1700
1800 - 2000
2100 - 2800
650 - 800
850 - 1100
Charging time in
min. Current
default 200mA
430 - 500
540 - 660
700 - 780
810 - 1050
250 - 310
330 - 430
Charging time in
min. Current
700mA
100 - 120
130 - 160
170 - 190
200 - 260
55 - 70
75 - 95
35
Charging time in
minutes
Current 500mA
160 - 190
200 - 240
260 - 290
300 - 400
90 - 110
115 - 150
Charging time in
minutes
1000mA
60 - 80
85 - 100
110 - 120
125 - 170
40 - 45
50 - 60
GB