Important Safety Precautions - Memorex RX 1 Smart Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important safety precautions

This battery charger is designed for indoor use only. Keep the
charger away from direct sunlight, humidity, heat or extreme cold.
It has been designed to charge NiMH (nickel metal hydride) batteries only.
Attempting to charge any other type of batteries like throw-away cells,
alkaline rechargeable (RAM) batteries, Lithium-Ion or other types pose a
safety hazard as they may explode, cause personal injury or damage.
Do not charge leaking or corroded batteries.
Using another AC/DC adaptor than the one supplied with the charger could
damage the charger or its accessories and will cancel the warranty of the
charger and the AC/DC.
Never use the charger with an extension cord or any attachment not rec-
ommended for this charger.
During charging, the unit, the power supply and the batteries may feel
warm. Use the charger in an open space at an ambient temperature be-
tween 16° and 30°C (61° and 86°F).
Do not use the charger on a carpet or blanket, to reduce the risk of fire.
Do not disassemble the charger. Incorrect reassembly may result in electric
shock or fire.
Always unplug the charger from the outlet when not in use also before at-
tempting any maintenance or cleaning, to reduce the risk of electric shock.
This charger is not intended for use by young children without supervision.
Features of the RX 1 Smart
Designed to charge 1, 2, 3 or 4 pcs AA/HR6 or AAA/HR03 rechargeable
NiMH batteries and the new generation NiMH 'Ready to Use' batteries.
Four independent charging channels and circuitry. Individual LCD screens
per channel for display of mode, capacity (mAh), voltage (V), charging time
and current (mA).
Adjustable charging rates
Adjustable discharging rates 100 - 250 - 350 - 500mA (default 100mA).
Slow trickle charge at full battery to keep it in a fully charged state at a
rated current of ± 5% of the charging current.
Four modes of operation : charge, discharge, refresh and test.
USB Port 5V (1A) power supply to charge and/or power small devices
(smartphones,..)
Supplied with a 12V transformer operating on 100V and 240V – for world-
wide use.
Batteries not included.
200 - 500 - 700 - 1000mA (default 200mA).
34

Publicité

Table des Matières
loading

Table des Matières