TFA 30.3069.01 Mode D'emploi page 13

TFA_No. 30.3069_Anleit_10_24
Wireless Thermometer
• The device will automatically quit the MAX/MIN mode if no button is
pressed for 10 seconds.
• To clear the recorded maximum or minimum readings manually, press
and hold the – button for three seconds while the maximum or minimum
values are displayed.
7.3 Trend indicator
• The trend arrows on the display indicate if the values are increasing or
decreasing. If the values remain the same, there is no display.
7.4 Alarm time setting
• Press and hold the TIME ALARM button for three seconds to enter the set-
ting mode. The alarm symbol and ALM ON appear on the display.
• The hour digits flash.
• Press the + or – button to set the desired time.
• Confirm the setting with the TIME ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the TIME ALARM button.
• The current time and the alarm symbol appear on the display.
• The alarm is activated.
7.4.1 Activate and deactivate the alarm
• To activate and deactivate the alarm function press the TIME ALARM but-
ton in normal mode.
• The last adjusted alarm time appears for 2 seconds on the display.
• The alarm symbol and ALM ON appears on the display, if the alarm is acti-
vated.
• ALM OFF appears on the display, if the alarm is deactivated.
• Wait some seconds until the display returns to normal mode to confirm
the setting.
• When the alarm is activated, the alarm starts to ring when the set alarm
time is reached.
• Press any button (except TIME ALARM ) and the alarm will stop.
• If the alarm is not stopped manually, the alarm tone automatically turns
off after two minutes and will be reactivated at the same set time on the
following day.
24
22.10.2024 9:10 Uhr Seite 13
Wireless Thermometer
• The alarm symbol remains on the display.
• When the alarm rings, press the TIME ALARM button and the snooze func-
tion is activated.
• The alarm will be interrupted for 10 minutes. The alarm symbol flashes on
the display and the time display counts down until the next alarm.
7.5 Outdoor temperature alarm
• Press and hold TEMP ALARM button in normal mode.
• MAX and the temperature alarm symbol appear. OFF flashes.
• Press the + or – button to activate the function.
• 60°C (default) or the last adjusted upper outdoor temperature limit
appears and ON flashes on the display.
• Confirm with the TEMP ALARM button.
• Press the + or – button to set the desired upper limit while the indication
flashes.
• Confirm the setting with the TEMP ALARM button.
• MIN and the temperature alarm symbol appear. OFF flashes.
• Press the + or – button to activate the function.
• -40°C (default) or the last adjusted lower outdoor temperature limit
appears and ON flashes on the display.
• Confirm the setting with the TEMP ALARM button.
• Press the + or – button to set the desired lower limit while the indication
flashes.
• Confirm with the TEMP ALARM button.
• Press the TEMP ALARM button in normal mode, to activate or deactivate
the corresponding alarm function. The respective symbol will appear or
disappear on the display.
7.5.1 Alarm event
• In the event of an alarm, the corresponding symbol will be flashing and an
alarm tone will sound.
• Stop the alarm tone with any button.
8. Positioning and mounting of the base station and the transmitter
• Place the base station in any room of the house. Make sure to avoid the
vicinity of any source of interference such as computer screens, TV sets
or solid metal objects.
25