Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
(Continued)
POWER / TAPE 2 DIRECTION
FUNCTION
PLAY
TAPE 2 playback (both tape sides)
1
Set the FUNCTION switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into
the TAPE 2 cassette compartment.
3
Set the REVERSE MODE switch to : P to listen to each
tape side once, or 9 S for endless repeat of the entire
tape.
When the : P setting of the REVERSE MODE switch is
selected, playback always stops at the end of side B(2).
4
Press the PLAY button of TAPE 2.
The POWER indicator will light up.
To change the side of tape:
Press the DIRECTION switch during playback.
To listen to side A(1), the TAPE 2 DIRECTION "A" indicator
will be illuminated.
To listen to side B(2), the TAPE 2 DIRECTION "B" indicator
will be illuminated.
To fast wind the tape:
Press the STOP/EJECT button, then the FAST button (3 or
2 as desired).
Caution:
When the end of the tape is reached during fast forward/
rewind operation, the tape will stop, but the motor will con-
tinue to rotate. Press the STOP/EJECT button immediately.
To stop playback:
Press the STOP/EJECT button.
DIRECTION
REVERSE
MODE
STOP/EJECT
FAST
PAUSE
PLAY
STOP/EJECT
Continuous playback (TAPE 2 to TAPE 1)
1
Press the STOP/EJECT button and load cassettes into the
TAPE 1 and TAPE 2 cassette compartments.
2
Set the REVERSE MODE switch to : P.
The continuous playback function will not operate when the
REVERSE MODE switch is set to 9 S.
3
Press the PLAY button of TAPE 2.
4
Select side A(1) or side B(2) on TAPE 2 with the DIREC-
TION switch.
When playback begins from side A(1) on TAPE 2, the play-
back sequence will be as follows:
TAPE 2 side A(1)
When playback begins from side B(2) on TAPE 2, the play-
back sequence will be as follows:
TAPE 2 side B(2)
5
Press the PAUSE button of TAPE 1.
6
Press the PLAY button of TAPE 1.
When TAPE 2 stops at the end of the tape, the PLAY but-
ton of TAPE 2 and the PAUSE button of TAPE 1 will be
automatically released, and TAPE 1 will start playing.
Note:
When in the continuous play mode, pressing the STOP/
EJECT button of TAPE 2 will start TAPE 1 automatically.
E-8
TAPE 1
TAPE 2
side B(2)
TAPE 1 side A(1)
stop
TAPE 1 side A(1)
stop
Publicité
