Sharp GX-CD1200WBK Mode D'emploi page 8

All manuals and user guides at all-guides.com
RADIO OPERATION
FM FINE
POWER
STEREO TUNING
FUNCTION FM MONO/
FM STEREO
1
Set the FUNCTION switch to RADIO.
The POWER indicator will light up.
2
Set the BAND SELECTOR switch to FM, MW, SW1 or SW2.
CASSETTE OPERATION
TAPE 1
REWIND PAUSE
F FWD
PLAY STOP/EJECT
3
Use the TUNING control to tune in to the desired station.
The FINE TUNING control functions only for SW1 and SW2
TUNING
bands.
4
To receive an FM stereo transmission, set the FM MONO/
FM STEREO switch to FM STEREO.
The FM STEREO indicator lights up when an FM broad-
cast is in stereo.
5
If the FM reception is weak, set the FM MONO/FM STEREO
switch to FM MONO.
Although the reception changes to monaural, the sound be-
comes clearer.
After use:
Set the FUNCTION switch to STAND-BY.
Aerial adjustment
FM
BAND
SELECTOR
Note for users in Australia and New Zealand:
This product can receive FM stereo/FM monaural and AM
monaural broadcasts. AM stereo broadcasts will not be played
in stereo.
TAPE 1 playback (one tape side only)
1
Set the FUNCTION switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into
the TAPE 1 cassette compartment.
FUNCTION 3
Press the PLAY button of TAPE 1.
The POWER indicator will light up.
Fast forward/rewind:
To advance the tape, press the STOP/EJECT button, then press
the F FWD button. To rewind, press the STOP/EJECT button,
then press the REWIND button.
Notes:
When the end of the tape is reached during the recording,
playback, fast forward or rewind mode, the full auto stop
system is activated and automatically puts the unit into the
neutral (stop) mode.
If the PAUSE button is pressed whilst the fast forward or
rewind operation is in progress, the F FWD or REWIND
button will not be released when the tape end is reached.
In this case, press the STOP/EJECT button.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
Be sure not to press the PLAY and REWIND buttons simul-
taneously, or the tape will become damaged.
Before changing from one tape operation to another, press
the STOP/EJECT button.
If TAPE 1 and TAPE 2 are played simultaneously, only the
sound from TAPE 2 will be audible.
The TAPE 2 DIRECTION indicator refers to the travel di-
rection for TAPE 2 [Side A (1) or Side B (2)]. It is not related
to the movement of TAPE 1.
E-7
MW/SW1 SW1/SW2