Télécharger Imprimer la page

Important - DeLonghi F 26200 Mode D'emploi

Publicité

ELECTRICAL CONNECTION (U.K. ONLY)
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket,
the plug should be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very
carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the cir-
cuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fit-
ted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the
fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your neare-
st electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the
plug.
B) If your appliance is not fitted with a plug, please follow the instructins provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accor-
dance with the following code:
Green and yellow Earth
Blue
Brown
As the colours of the wires in the mains lead may
not correspond with the coloured markings iden-
E
Neutral
L
N
Live
tifying the terminals in your plug, proceed as fol-
lows:
The green and yellow wire must be connected to the
terminal in the plug marked with the letter E or the
earth symbol
or coloured green or green and
yellow.
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the terminal
marked with the letter L or coloured red.

Publicité

loading