Brandt BIS624ES Manuel D'instruction page 25

WARNING:
If the unit was shipped to home in a horizontal
position, place it vertically and wait two hours
before plugging it in. A small amount of oil may
have flowed into the refrigeration circuit, you
need to give it time to flow back towards the
motor before connecting the appliance,
otherwise you may damage it.
Before any maintenance, disconnect the power
plug. Do not pull the power cable but directly
enter the profile.
CLEANING AND MAINTENANCE
 Before cleaning, unplug the appliance and
turn off the power.
 Do not clean the appliance with metal
objects, a steam system, volatile oils, organic
solvents or abrasives.
 Do not use sharp objects to remove ice. Use
a plastic scraper.
 To replace the light bulb, if operation is
possible by the user himself, please refer to the
"Maintenance" of this manual. Always be sure
to unplug your appliance before.
WARNING: If the appliance is equipped with a
LED lighting, it can only be replaced by a
qualified technician
7
.