ARDES AR6A09 Instructions D'emploi page 10

A. Main unit
B. Container
1. USB socket
2. Lighting button
Battery charging
To charge battery, connect the USB socket (1) to a USB port by USB calbe provided with
the appliance.
While charging, the led (4) will blink.
When charging is complete, the led (4) switches off.
How to use the bug catcher
Disconnect the USB cable.
Assembly the cover of the tube (7), the insect collector tube (6) and the suction tip (5)
together, then connect them to the main unit (A).
To suck the insects, place the suction tip (5) near the insect by holding the appliance at 45
degreee angle and push the suction button (3):
Once the insect is in the collector tube (6):
- Stop pushing the suction button (3);
- Disconnect the container (B) from the main unit (A);
3. Suction button
4. Led light
5. Suction tip
6. Insects collector tube
7. Cover of the tube
(EN) User instructions
10 / 30