Power Off - Papago GoSafe 230 Guide D'utilisation

3. Start and Go
3.1 Power On
Insert the car charger cable into the car's cigarette lighter and the other end
into the Mini USB port on the device. Make sure to install the Micro SD Card
into the Micro SD Card slot on device. After turning on, the system will start
recording automatically. The LED light will turn Red when recording mode
has started.
Reminder: Please format Micro SD card before you start recording. Please
refer to page 2 for instructions.

3.2 Power Off

To Turn off device, hold the power button for at 3 seconds. To avoid
corrupting the last file recorded, do not eject SD Card immediately after
powering off.
To turn it back on, simply hold power button for at least 1 second.
3.3 LED
LED Color
Red LED blinking
Red LED on
Green LED on
English 6
Behavior
Recording
Standby
Charging