Papago GoSafe 230 Guide D'utilisation page 10

4. Settings
A. Video Menu Settings
Press the Menu button once to enter Video menu settings. Use the up /
down buttons to select the listed settings. Press the OK button to select and
confirm options. To Exit, press the Menu button twice.
● Specific menu is as follows:
1. Resolution: 1080FHD/720P/WVGA/VGA
2. Loop Recording: off /1 /2 /3 / 5 minutes
3. Exposure: Value can be set between -2 and +2.
4. White Balance: Automatic / Daylight / Cloudy / Tungsten / Fluorescent
5. Motion Detection: Off / On
6. Date Stamp: Off / On
B. Main menu settings:
Press Menu button twice to enter the Main menu settings. Use the up / down
buttons to select the listed settings. Press the OK button to select and
confirm options. To Exit, press the Menu button.
● Specific menu is as follows:
1. Beep (Key) Sound: On / Off
2. Record Audio: On / Off
3. Fill Light: On / Off
4. Frequency: 50HZ / 60HZ
5. Auto Power Off: Off/ 1 Min / 3 Min / 5 Min
6. Screen Saver: Off / 10 Sec / 30 Sec / 1 Min
7. Date/Time – Set
8. Language: English / Traditional Chinese / Français / Español / Portuguese
9. TV Out: NTSC / PAL
10. Format: (To format SD Card. Note: All data will be deleted)
11. Version: (To view software version)
12. Default Setting
English 9