Power Off - Papago GoSafe 535 Guide D'utilisation

3. Start and Go
3.1 Power On
Insert the car charger cable into the car's cigarette lighter and the other end
into the Micro-USB port on the device. Make sure to install the Micro SD
Card into the Micro SD Card slot on device. After turning on, the system will
start recording automatically. The LED light will turn flashing when recording
mode has started.
*Reminder: Please format Micro SD card before you start recording. Please
refer to page 2 for instructions.

3.2 Power Off

Hold down the power button at least 5 seconds to turn off device. To avoid
breaking down the last file recorded, do not eject the SD Card immediately
after powering off.
If you need to turn it back on simply hold the power button for at least 3 seconds.
English 6