Power Off - Papago GoSafe S780 Guide D'utilisation

3. Start and Go
3. Start and Go
3.1 Power On
Insert the car charger cable into the car's cigarette lighter and
the other end into the mini USB port on the device. Make sure
to install the Micro SD Card into the Micro SD Card slot on
device. After turning on, the system will start recording
automatically. The LED light will turn green when recording
mode has started.
*Reminder: Please format Micro SD card before you start
recording. Please refer to page 2 for instructions.

3.2 Power Off

Hold down the power button at least 5 seconds to turn off
device. To avoid corrupting the last file recorded, do not eject
SD Card immediately after powering off.
If you need to turn it back on simply hold the power button for
at least 3 seconds.
3.3 LED
LED Color
Green ON
Green OFF
English 6
Behavior
Power ON, Recording
Power OFF, not Recording