Power Off - Papago GoSafe S810 Guide D'utilisation

3. Start and Go
3.1 Power On
Insert the car charger cable into the car's cigarette lighter and the other end
into the mini USB port on the device. Make sure to install the Micro SD Card
into the Micro SD Card slot on device. After turning on, the system will start
recording automatically. The LED light will turn green when recording mode
has started.
*Reminder: Please format Micro SD card before you start recording. Please
refer to page 2 for instructions.

3.2 Power Off

Hold down the power button at least 5 seconds to turn off device. To avoid
corrupting the last file recorded, do not eject SD Card immediately after
powering off.
If you need to turn it back on simply hold the power button for at least 3
seconds.
3.3 LED
LED Color
Green ON
Green OFF
English 6
Behavior
Power ON, Recording
Power OFF, not Recording