Publicité
POLISHING PAD
1
Remove the protective cap from the
thread of the base plate 4.
Attach the polishing foam
pad 5
base plate 4.
Caution! Make sure the yellow
washer remains on the base plate.
3
With the 14 mm wrench in place, screw
the base
plate 4
into the thread of the
polisher.
Do not use the same polishing pad
for metal and coated surfaces.
SPEED SETTING
1
Use speed dial
6
to set the operation
speed.
Caution! Make sure not to cover the
ventilation slots during operation.
Technical Data
Nominal voltage
Rated power
No-load speed (n
)
0
Diameter base plate
Spindle thread size
Weight
Protection Class
Sound pressure level (L
)
pA
Sound power level (L
)
wA
Max. vibration emission (a
)
h,ID
106
EN
All manuals and user guides at all-guides.com
2
Place the machine upside down on its
auxiliary handle.
to the
Caution! Make sure the tool is
switched off and unplugged.
4
Make sure that the base
plate 4
curely attached to the polisher and re-
move the 14 mm wrench.
2
The operation speed can be set in six
steps from:
1 = 1500/min - 6 = 6800/min
230 - 240 V / ~50 Hz
600 W
1500 - 6800/min
145 mm
M8
2.22 kg
/ II
80 dB(A) / Uncertainty K = 3 dB(A)
91 dB(A) / Uncertainty K = 3 dB(A)
<2.5 m/s
/ Uncertainty K = 1.5 m/s
2
1.
1
3
is se-
1
2
2
2.
4
2.
2
1.
EN
107
Publicité
