Publicité
Preparation for take-off
Connection in the harness
Once the pre-flight has been carried out and validated, it is
time to properly connect to the harness:
- Put the harness on using the straps.
- Connect the left and right thigh loops
- Connecting the chest strap
2
« Clic »
1
1
2
« Clic »
- Close the cocoon using the anti-forgetting system
- Connect tbe 2 plastic clips on the cockpit
- Connect the kocon cover clip (orange cord)
4
1
Despite the presence of an anti-forget system, it is essential to
Despite the presence of an anti-forget system, it is essential to
pay particular attention during the attachment phase in the
pay particular attention during the attachment phase in the
harness.
harness.
Just as much as the harness settings, the pilot's take-off gestures
Just as much as the harness settings, the pilot's take-off gestures
are crucial for ease of installation.
are crucial for ease of installation.
More detailed information is available at www.korteldesign.com
More detailed information is available at
56
KANIBAL RACE II & ST
4
« Clic »
5
www.korteldesign.com
3
5
3
4
Publicité
