Publicité
3.3. MAIN PARTS
1 Detergent tray
2 Control button
3 Operating panel
4 Door
5 Drum
6 Door seal
7 Maintenance hatch
8 Supply hose
9 Discharge hose
q Power cord
w Drain hose
e Filter
3.4. REQUIRED TOOLS
• Level
• Spanner M13
• Spanner M17
3.5. REMOVING THE TRANSPORT PROTECTION
1.
Loosen the four bolts of the transport protection.
2.
Remove the transport protection (4×) with an M13 spanner.
Some force is required to remove the bolts. Make sure that the
rubber and white plastic also come out of the appliance.
3.
Save for future use.
3
3.6. FIXING THE FOAM RUBBERS
NOTE
It is recommended to place foam rubbers under the washing machine. This reduces the noise of the washing machine when it is
on.
1.
Lay the washing machine down on the floor. For protection, use soft material such as foam or clothing between the
washing machine and the floor.
2.
Stick the long foam rubbers to the long side of the bottom of the washing machine. Stick the short foam rubbers to the short
side of the bottom of the washing machine.
1
2
3
4
5
6
7
45
8
9
q
w
e
Publicité
