Publicité
Storing Scanned Data
This section describes the fl ow of basic Scan and Store operations. It also describes an example of how to store
scanned data in a mail box.
1
Placing Originals
●
Place the original on the feeder or
the platen glass.
2
Selecting Function
●
Select [Scan and Store] from the
Main Menu screen.
3
Select Storage
●
Specify the mail box that you
want to store the fi le in.
•
Select the desired mail box.
4
Start Scanning
●
After specifying the settings,
press
.
•
If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, fi rst insert a control card.
•
If a login service, such as Department ID Management or SSO-H has been set, press
2
Placing originals in the feeder
•
Adjust the slide guides to fi t the size of your
originals. Neatly place your originals with the
side to be copied face up.
•
Press [Scan and Store].
•
Press [Scan].
•
Press
.
(Log In/Out) to log out.
Placing originals on the platen glass
•
Open the feeder.
•
Place your originals face down.
•
Select [Mail Box] from the screen where you can
select the type of storage location.
As an example, this procedure uses a mail box to store
scanned data.
You can set various scan functions. For more
information, see e-Manual > Scan and Store.
Flow of Basic Operations
41
Publicité
