Publicité
GB
5.
Now, move the direction switch
(1) to the "I" position, then turn
the appliance back on. (see
section "Operation/switching
on/off").
The reverse function is only pos-
sible if the housing plate (
connected and installed correctly.
Emptying the collection bag
Empty the collection bag promptly.
Be aware that the collection bag
fills unevenly under the discharge
chute!
1. Turn the device off.
2. Unhook the collection bag ( 11) and
empty.
3. Suspend the collection bag ( 11) by
the handles from the collection bag
fixing points ( 9) on both sides of the
housing ( 5).
Overload protection
In the event of overload, e.g. due to
branches that are too thick, the equip-
ment automatically switches off.
Restart prevention
After switching off automatically as a
result of overload, the equipment will not
restart automatically.
To switch back on:
1. Let the engine cool down
2. Move the direction switch (
"I" position.
3. Press the reset switch (
4. Switch the device back on.
28
Working methods
General working instructions
7) is
• Keep hold of branches while feeding
• To move the chopped material back,
• Be aware of the possible intake speed
• Keep to the working speed of the
• To protect the shredder from clog-
• Before you shred roots, remove any
• Do not shred soft, damp material
• Keep a few dry branches for the end,
• Only switch the shredder off when all
1) to the
A
A
2).
Keep enough distance to the
shredder since long branches
can be spun off while being
drawn into the shredder.
Wear ear and eye protection
Wear hand protection
them into the shredder until they are
automatically drawn in.
only use the supplied plunger (
of the cutter and do not overload the
equipment.
shredder and do not overload it.
ging, shred wilted garden waste
that has been left for a few days
and shred thin twigs alternately with
branches.
remaining soil and stones from them
such as kitchen waste, but take it
straight to the compost.
as they will help clean the shredder.
of the shredding material has passed
through the cylinder. Otherwise, the
cylinder may jam the next time you
switch the shredder on.
18)
Publicité
