Publicité
3.5 REMOTE CONTROL DISPLAY
Signal Emission Symbol
It appears when control signal
is emitted.
Setting temp Display
Displayed the setting
temperature.
Timer Display
Display hour when setting
timer also can display the
temperature when setting
I FEEL function
On/Off Timer Display
It appears when UVC
function is set.
Instruction for remote controller
• The remote controller uses two AAA batteries under normal condition, the batteries last
for about 6 months. Please use two new batteries of similar type (pay attention to the poles in installing).
• The effective control distance of the remote controller is about 8m.
• When using remote controller, please point the signal emitter towards indoor unit receiver; There should
be no obstacle between remote controller and indoor unit.
• Pressing two buttons simultaneously will result wrong operation.
• Do not use wireless equipment (such as mobile phone) near indoor unit. If interference occurs because
of this, please switch off the unit, pull out power plug, then plug again and switch on after a while.
• There is no direct sunlight to the indoor receiver, or it can not receive the signal from the remote contro-
ller.
• Don' t cast the remote controller.
• Don' t put the remote controller under the sunlight or near the oven.
• Don' t sprinkle water or juice on the remote controller, use soft cloth for cleaning if it occurs.
• The batteries must be removed from the appliance before it is scrapped and that they are disposed of
safety.
• Please note some functions will be available depending on the product model and features.
Heating function is present only on Heating & Cooling models.
3. COMPONENT DESCRIPTION
It appears when turbo function
is set in COOLING or HEAT mode, and
Sleep Mode Display
Horizontal Swing
Displayed when
Pressing "Sleep"
button, the unit will
Pressing "H-SWEEP
run in sleep mode.
Pantalla Turbo
will flash.
Lock Display
Display
Displayed when
Displayed when
Pressing "LOCK"
button.
45
Pantalla de selección del
modo de funcionamiento
AUTO
COOL
SWEEP
Wind Speed
Selection Display
Vertical Swing Display
Displayed in according with
vertical blades position and
swing or not.
Pantalla de bloqueo
Aparece al presionar
el botón "LOCK".
button.
HEAT
A
DRY
Auto
High speed
Medium speed
Low speed
Quiet speed
Publicité
