Publicité
6
ACTIVATING THE DEVICE
Plug the enclosed power supply unit (mains adapter) into a wall socket. Switch on the power leading to the
assembly location.
You can see if the device receives power by checking the PWR-LED, which lights up after the device gets
connected to power. If the PWR LED does not light up, please check whether you have connected the positive
pole and negative pole to the device correctly.
PWR LED
You can check if the power supply and PoE supply of the device are working by checking the PWR LED. The
PWR-LED should be active.
red
= Power on, no PoE device connected
blue = PoE IEEE 802.3af device connected
green = PoE+ IEEE 802.3at device connected
TECHNICAL SPECIFICATIONS
81 x 44,75 x 31 mm (L x W x H)
Dimensions
3.19 x 1.76 x 1.22 in (L x W x H)
Power supply
57 V DC, 1 A
Power
Up to 35 W
consumption
0 to +55°C / 32 to 131°F
Operating
Relative Humidity 0 % to 85 %
conditions
(non condensing)
Protection class
IP 30
• Top-hat rail / DIN rail
Mounting
• Wall mounting
Approvals
CE, FCC, IC, RoHS, WEEE, UKCA
1x PoE Injector
1x Power supply unit (mains
adaptor) with up to 4 country-
specific outlet adaptors
Scope of delivery
(100 - 240 V AC to 57 V DC)
1x Installation Guide
1x Small parts
6
• LAN in 10/100/1000 Mbit/s RJ45
• LAN/PoE out 10/100/1000
Connectors &
Interface
Mbit/s RJ45
• 57 V DC Input (-/+)
LED
PWR LED
PoE IEEE 802.3at (Mode A+B,
PoE Out
Midspan)
Network speed
10/100/1000 Mbit/s
max. 80 m/262 ft (Input +
Cable length
Output) via Cat.5e/Cat.6/Cat.7
Weight
70 g
EAN
4260423913868
Publicité
