Publicité
COMPONENTS
1x Gigabit High-PoE-
Injector A1093
1x Screw connection
terminal plug and
1x Screw driver
DEVICE
1) LAN in
RJ45 jack to connect a standard network cable
Cat.5e or better, coming from the Internet Router
2) LAN / PoE out
RJ45 jack to connect a standard network cable
Cat.5e or better, going to the device to supply with
PoE and network data
3) PWR LED
Power and diagnostic LED to display the current
status of the device
4) 48-57 V DC -/+,1 A
Screw terminal plug for connecting the DoorBird
power supply
5) DIN rail connector
Connection for DIN rail clip for DIN rail mounting
6) Wall mounting holes
Screws and dowels included
VIDEOS
Need help with the installation? Be sure to watch our
installation videos which can be found on
http://www.doorbird.com/support
1x Installation manual
2x Phillips countersunk
head screws and
dowels
1x Power supply unit (mains adapter) with up to
four country-specific adaptors
1
2
3
4
INSTALLATION
All the steps below should be carried out carefully
by a competent adult, taking into consideration
any applicable safety regulations. Please contact us
directly or seek the advice of a competent specialist.
Please ensure that all wires used for the
installation are undamaged along their entire
length and approved for this type of use.
5
6
3
Publicité
