Publicité
1
SWITCHING OFF POWER
Switch off the power to all wires leading to
the assembly location, i.e. the door chime,
electric door opener, power supply unit for
the device etc.
3
MOUNTING THE DEVICE
The device can be mounted on the wall using the wall mount holes, screws and dowels supplied with it or on DIN
rail using the DIN rail adapter supplied with it.
Option 1
WALL MOUNTING
Ensure to hit no objects (e.g. cables) when drilling the holes.
If the wall of the house is not made of wood,
you should drill dowel holes 5 mm (0.196 in) in
diameter in the wall and then place the dowels
provided into the boreholes. If the wall of the
house is made of wood, you will usually not
require any dowels. There are special dowels for
assembling the device on an insulating wall, e.g.
Fischer insulating dowels. Please check with your
insulating material manufacturer regarding which
dowels they recommend.
Option 2
DIN RAIL MOUNTING
The device can be mounted on DIN-Rail. Use the DIN rail adapter on the back of the unit.
4
2
DETERMINING THE ASSEMBLY
LOCATION
The device is IP30 certified (not water-proof).
Please make sure to put the device into an
suitable non mobile radio interfering housing
if you want to use it outdoors.
The network cable between the device and the
Switch/Internet Router can have a maximum length
of 80 meters/262 feet.
Publicité
