Publicité
Cleaning the Spray Arms
The spray arms can be easily removed for periodic
cleaning of the nozzles, to prevent possible
clogging�
To remove the upper and lower spray arms, hold
and unscrew or pull them out�
Wash the spray arms under running water and
attach them back in place, checking that the
rotary movement is in no way impeded.
Frost Precautions
Avoid placing the dishwasher in a location where the temperature
is below 0°C� If this is unavoidable, empty the dishwasher, close the
door, disconnect the water inlet pipe and empty it�
GB
60
All manuals and user guides at all-guides.com
Troubleshooting
Problem
Dishwasher
will not
start�
Water not
pumped
from
dishwasher
Possible Causes Solutions
Fuse blown, or
Replace fuse or reset circuit
the circuit breaker
breaker� Remove any other
tripped
appliance sharing the same circuit
with the dishwasher�
Power supply is
Make sure the dishwasher is
not turned on�
turned on and the door is closed
securely�
Make sure the power cord is
properly plugged into the wall
socket�
The door has not
Close the door securely�
been properly
closed�
Kink in drain hose Check drain hose�
Filter clogged
Check the filters (see "Cleaning
the Filter Unit")�
Kitchen sink
Check kitchen sink to make sure
clogged
it is draining well� If kitchen sink
is not draining, you may ask a
plumber to check it�
GB
61
Publicité
