Publicité
NOTE: The salt container must only be refilled when the refill salt
indicator light illuminates� Depending on how fully the salt
dissolves, the refill salt indicator light may still be on even
though the salt container is filled�
Using the Rinse Aid and Detergent Dispensers
The rinse aid helps the dishes dry faster and
prevents the formation of scale deposits
and staining� It is automatically added to
the water during the final rinse cycle�
The detergent and rinse aid dispensers are
located on the inner part of the door: the
detergent dispenser is on the left, and
the rinse aid dispenser is on the right�
Adding the rinse aid
1�
Rotate the dispenser cap anticlockwise and remove it�
2�
Add the rinse aid until the container is full�
GB
• The optical level indicator on the side of the cap should be
completely dark�
3�
Replace the cap and turn it clockwise�
NOTE: Refill the rinse aid when the optical level indicator becomes
clear again, or when the rinse aid indicator light illuminates�
52
All manuals and user guides at all-guides.com
Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 5 and you can choose among
6 settings�
The amount of rinse aid dispensed is proportional to the selector
position�
1�
2�
3�
NOTE: The amount of rinse aid must be increased if the washed
Adding the detergent
1�
2�
To adjust the rinse aid setting, remove the dispenser cap�
Rotate the rinse aid selector to the desired position�
Replace the cap and turn it clockwise�
Adjust lever (Rinse)
dishes appear dull or feature circular stains� If the dishes are
sticky or have white streaks, it is necessary to reduce the rinse
aid setting�
To open the detergent dispenser cap, gently press the release
button�
Add the detergent and close the cap�
GB
53
Publicité
