Télécharger Imprimer la page

Parkside 110140 Instructions D'utilisation Et Consignes De Sécurité page 34

Publicité

Introduction
The following pictograms are used in these instructions for use / on the equipment:
Please read the instructions for use!
Note
Wear hearing protection!
Observe the warning and safety
instructions!
Caution! Explosion hazard!
Pneumatic chipping hammer
PDMH 4500 A2
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the instructions for
use and the safety advice below. Initial operation of
this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
The chipper is a compressed air operated tool for
versatile use. It is suitable e.g. for working in grooves,
chipping off tiles or plastering, wall breakthroughs,
cutting sheet steel, and chipping off bolts and rivets.
This tool is only suitable for indoor use. Keep these
instructions in a safe place. When passing this prod-
uct on to others, please also include all the documents.
Any use other than the intended is prohibited and
potentially dangerous. Damages resulting from
34 GB
110140_par_Druckluft-Meisselhammer PDMH 4500 B2_content_FR.indd 34
All manuals and user guides at all-guides.com
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer's
liability. This device has been designed for household
use and may not be used for commercial or industrial
purposes.
the product if it is defective.
1
2
3
4
5
6
7
8
9
10
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as a
power source.
Oil daily
Wear hearing protection, dust mask,
safety glasses and protective gloves.
Compressed air hose
Dispose of packaging and device in
an environmentally-friendly way!
Features
Check that all the items are present and
that the product is in perfect condition
immediately after unpacking. Never use
Air adjusting screw
Plug nipple
Trigger
Tension spring
Moil chisel
Flat chisel (universal chisel)
Rivet chisel
Slitting chisel (sheet metal chisel)
Corner chisel
Speciality oil for compressed air
24.06.15 17:01

Publicité

loading

Ce manuel est également adapté pour:

Pdmh 4500 a2