Publicité
REAR WHEEL ASSEMBLY
Seperate the wheels by cutting the zip tie
3.1
with a wire cutter. Remove the cardboard
packaging of both wheels.
0 8 y t
PREPARING
Remove the frame cover from the main frame.
3.2
Cut the zip ties with a wire cutter and remove
the foam transport protection from the chain-
stay.
All manuals and user guides at all-guides.com
Place the rear wheel in the frame, making
4.1
sure that the chain is on the cog.
Use an Allen key (2,5 mm) to adjust the chain
4.4
tensioners, sliding the rear wheel along the
drop-outs until the chain is at the correct ten-
sion. Make sure that the rear wheel is proper-
ly centered in the frame, with the same dis-
tance from the tire to the frame on each side.
REAR WHEEL ASSEMBLY
Carefully insert the rear wheel bolts in the
Now place the chain on the chain ring. Note
4.2
4.3
axle of the rear hub.
that the rear axle tensioners must first be
fully loosened.
Please follow the
torque specifications of
the manufacturers:
Rear axle //
Tighten the rear axle bolts. Please note that
4.5
this hub is mounted to the frame with one
bolt on each side. Consequently, each bolt
must be tightened to the recommended
torque.
25 – 30 Nm
y t 0 9
Publicité
