Publicité
UNBOX YOUR BIKE
Cut the packaging straps using wire cutters
1.1
or a box cutter. Just make sure not to dam-
age the YT BikeBox. Now you can pull out
the flaps and open it.
Now you can lift your bike upwards, out of
1.3
the box.
0 6 y t
All manuals and user guides at all-guides.com
Lift the wheels out of the box. Put the wheels
1.2
in a safe place on the side of the box.
Place the frame on the front /rear axle stand.
1.4
Make sure the bike is standing safely!
HANDLEBAR ASSEMBLY
Remove the handlebar clamp on the stem by
Install the handlebar. Mount the handlebar to
2.1
2.2
removing all screws (Allen key 4 mm ).
the stem (Allen wrench 4 mm).
Make sure that the clamp gaps of the stem
2.4
bolts are even, and that the handlebar is
correctly centered and aligned in the stem
– there are markings to assist you with this.
Torque all bolts precisely to the spec indicated
by the stem and/or handlebar manufacturer.
Mount the handlebar to the stem (Allen wrench
2.3
4 mm). Tighten the screws in an X pattern. Do
it step by step with just one turn per screw at
a time.This is the only way to achieve an even
clamping of the handlebar in the stem.
Please follow the
torque specifications of
the manufacturers:
SRAM Descendant:
Steerer tube screws //
5 Nm
Handlebar clamp screws //
5 Nm
y t 0 7
Publicité
