Publicité
THE PASTA
ATTACHEMENT________________________________________
TO ASSEMBLE
1.
To remove the removable cover for mincer outlet (4), slide the catch then pull off.
2.
Hold the attachment one hand and press the release button another hand, then insert the attachment
into the outlet drive and turn until the drive clicks into place. You may have to turn it both ways, when
the drive is engaged, rotate the attachment so that the pin is in a vertical position, then engage the
pin into the slot. (See figure 1)
3.
Release the catch.
USEING YOUR PASTA MAKER
1.
Make your pasta dough, follow one of the dough recipes supplied.
2.
Set the adjustable knob on the side of the pasta attachment to number 1 by pulling the knob out and
turning.
3.
Flatten a piece of dough and sprinkle some flour between the rollers.
4.
Turn the kitchen machine to speed 1(you will see the rollers turning).
5.
Pass the piece of dough through the rollers repeating until you get a smooth surface ,(folding the dough
in half across its witch or length between rolling will help to achieve this).
6.
Adjust the knob progressively from 1 to 9, each time re-feeding the dough through the attachment to
achieve the desired thickness ,pasta thickness using settings 7 to 9 is recommended.
7.
Cut the rolled pasta into desired /manageable pieces, use as required.
Caution: when you use the pasta attachment, the speed control switch you could choose 3-4 speeds.
All manuals and user guides at all-guides.com
Publicité
