Télécharger Imprimer la page

Yard force SLM34KZD Guide De L'utilisateur page 16

Publicité

Before performing any maintenance or cleaning work, always pull out the mains plug and
wait until the blade has come to a standstill.
Problem
Motor does not run
Motor power drops
Grass catcher is not filled
sufficiently
Wheel drive does not
function (if equipped)
Faults which cannot be rectified with the aid of this table may be rectified at an authorized
repair facility.
TROUBLESHOOTING
Remedy
- Check mains connection cable and circuit breaker (fuse).
- Start on short grass or on an area which has already been
mowed.
- Clean discharge channel/housing (the mowing blade
must rotate freely).
- Correct the cutting height.
- Increase the cutting height.
- Clean discharge chute.
- Have mowing blade resharpened /replaced (customer
service centre).
- Correct the cutting height.
- Allow the lawn to dry.
- Have mowing blade resharpened /replaced (customer
service centre).
- Clean the grille on the grass catcher.
- Clean the discharge chute.
- Adjust the flexible cable.
- Check the drive wheels for damage.
15

Publicité

loading