Publicité
V 2.6
7.
Do not obstruct the flow of combustion and air ventilation.
a.
Clean passages with warm, soapy water.
b.
Do not use flammable or corrosive cleaning agents.
8.
Inspect the heater for leaks before each use.
9.
Inspect the hose/regulator assembly before each use.
a.
Replace the hose before use if the hose is cut or highly worn.
10. Have the heater inspected yearly by a qualified technician.
CAUTION! Only qualified service personnel should repair the tool.
STORAGE
1.
Do not store the heater while the heater is attached to a propane cylinder.
a.
Remove the gas supply hose from the cylinder by turning the fuel connector nut clockwise.
2.
Store the cylinder(s) in a safe manner. Refer to Chapter 5 of Standard for Storage and Handling
of Liquefied Petroleum Gases, ANSI/NFPA 58 and/or CAN/CSA B149.1. Follow all local codes.
3.
Always store cylinders outdoors.
4.
Do not store cylinders in an enclosed area.
5.
Place plastic cover caps over the brass fittings on the inlet connector and hose/regulator assembly.
6.
Store in a dry, clean, and safe place.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate
recycling facility.
TROUBLESHOOTING
If the tool does not function properly or if it is missing parts, contact Princess Auto Ltd. for a solution. If
unable to do so, have a qualified technician service the tool.
10
All manuals and user guides at all-guides.com
120,000 BTU Propane Radiant Heater
For technical questions call: 1-800-665-8685
8432734
Publicité
