Braun 5696 Mode D'emploi page 10

All manuals and user guides at all-guides.com
70S/70B
Series 7
r e l e ase
70S/70B
Environmental notice
Product contains batteries and/or recyclable electric waste.
For environment protection do not dispose of in household waste,
but for recycling take to electric waste collection points provided
in your country.
The cleaning cartridge can be disposed of with regular household waste.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem: Possible reason:
SHAVER
Unpleasant 1. Shaver head is
smell from the cleaned with water.
shaver head. 2. Cleaning cartridge is
in use for more than
8 weeks.
Battery 1. Foil and cutter are
performance worn which requires
dropped more power for each
significantly. shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
Shaving 1. Foil and cutter are
performance worn.
dropped 2. Personal setting of
significantly. shaving performance
has been changed.
3. Shaving system is
clogged.
10
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
t
for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S/70B
• Cleaning cartridge Clean&Renew CCR
Remedy:
1. When cleaning the shaver head
with water only use hot water
and from time to time some
liquid soap (without abrasive
substances). Remove Foil &
Cutter cassette to let it dry.
2. Change cleaning cartridge at
least every 8 weeks.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly
cleaned with water, apply a
drop of light machine oil on top
of the foil once a week for
lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave
we recommend the green
(intensive) setting.
3. Soak the Foil & Cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
machine oil on the foil.