Econo Cool Operation; Airflow Direction - Mitsubishi Electric Mr.Slim MS-A09WA Notice D'utilisation

F
AN SPEED AND
AIRFLOW DIRECTION ADJUSTMENT
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select airflow direction. Each press
changes airflow direction in the following order:
(AUTO) (1)
• Two short beeps are heard from the indoor unit when set to AUTO.
• Press for 2 seconds or more to set to horizontal position.
• Press once to cancel horizontal position.
• When the airflow direction is set to horizontal position, or when hori-
zontal position is cancelled, operation stops for about 3 minutes.

Airflow direction

(AUTO) .........The vane is set to the most efficient airflow direction: horizontal
position.
(Manual) .......For efficient air conditioning, select upper position for COOL/
DRY. During COOL/DRY, vane automatically moves to position
(1) after around 1 hour to prevent water dripping.
(Swing) .........The vane moves up and down intermittently.
Horizontal position
Recommended position during COOL/DRY. Air does not
blow directly to room occupants, providing comfortable airflow
distribution.
■ To change the horizontal airflow direction.
Move the vertical vane manually before starting operation.
(Med.) (High)
(2) (3) (4) (SWING)
E
CONO COOL OPERATION
Press during COOL mode

ECONO COOL operation.

The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 4°F (2°C) higher
automatically.
Press again to cancel ECONO COOL operation.
or
• Pressing also cancels ECONO COOL operation.
What is "ECONO COOL"?
Swing air flow (change of air flow) makes you feel cooler than constant air flow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
P
OWERFUL COOL OPERATION
Press during COOL mode
POWERFUL COOL operation.
Fan speed : POWERFUL-high (exclusive speed for POWERFUL
mode)
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
Press again to cancel POWERFUL COOL
operation.
• POWERFUL COOL operation is cancelled automatically in 15 min-
utes.
• POWERFUL COOL operation is cancelled when the following buttons
are pressed:
ON/OFF button, FAN button, ECONO COOL button
page 5 to start
page 5 to start
En-6