Publicité
bridle to existing harness bridle(s), if this is the case, you
must use the short bridle option. Only attach the Y bridle
to the loops located on top of the shoulder straps which
have been specifically designed for mounting the rescue
system.
Attach the reserve handle to one of the
loops on the deployment bag using a
small maillon or a larks foot knot. Please
refer to your harness manual to ensure the
correct orientation.
The Angel is now ready to be installed into the deployment
system of your harness. For detailed instructions of fitting
the Angel into the deployment system please consult your
harness manual.
If you have ANY doubts please consult a professional.
All manuals and user guides at all-guides.com
OZONE QUALITY
A
very own manufacturing facility. Every parachute, glider,
harness and accessory produced goes through a stringent
series of quality control checks and all of the components
used are traceable.
We always welcome customer feedback and are committed
to customer service. We will always undertake to fix
any problems not caused by general wear and tear or
inappropriate use. If you have a problem with your Angel
please contact your dealer/distributor who will be able to
decide upon the most appropriate action. If you are unable
to contact your dealer then you can contact us directly at
team@flyozone.com.
17
t Ozone we take quality very seriously; all of our
products are made to the highest standards in our
Publicité
