Yakima HoldUp Plus2 Manuel D'installation page 3

attach second traY to Base.
Align holes in base to holes in tray.
• Insert bolt, lock-
washer, and washer,
in order shown.
• Tighten with supplied
wrench.
wheel strap
fold holdup down.
• remove pin and
safety clip.
• Fold down holdup
• replace pin and
safety clip.
prepare for loadIng.
release wheelstrap
by pressing the lever
on the buckle.
1033443A-3/18
All manuals and user guides at all-guides.com
UPPEr TrAY:
IMPORTANT: Upper tray
has Yakima logo.
Wheel strap is to your
left, and pivot arm is to
your right.
fold pIvot arm down.
Tuck strap into
slot at rear of
whelltray.
pivot arm
Be sure pivot arm
is folded down.