Memory Functions; Auto Switch Off - ALLURIS SMT-200 Notice D'utilisation

Memory Functions

The maximum (highest inflection point), the minimum (lowest inflection
point) and the last measured value are saved automatically in the
CCCCC). It is automatically erased 5 minutes after the last measurement or
when the batteries are replaced.

Auto Switch Off

To save battery the instrument switches off automatically after a certain
period of time.
Technical Data / Maintenance
Measuring range max.:
Accuracy:
Temperature range:
Storage:
The instruments are maintenance free, except wear and tear and
consumption parts.
memory. Further values can
be captured by pressing the
MEM
measurement.
models can calculate and
indicate the average (AV) of
these
measurement values.
To recall stored data, press
MEM button after releasing
the measuring button.
The memory can be cleared
by keeping the MEM button
pressed for approx. 6 sec
(the
99.999 rpm (contact mode 25.000 rpm)
0,006% +/- 1digit
0°...40°C
-10°...55°C (keep dry)
button during
Certain
free captured
display indicates
the