m
Select screws according to the thickness of the wooden
8.
Attaching the edge
protection
beam: length = min. 2.5 x beam thickness, diameter #12
or #14.
Specify the number of screws according to the cavity
width, thereby ensuring that the beam can be atta-
ched securely.
According to the subsurface:
m
Locate wall studs near the rear panel of the cavity and
mark drill holes in the beam
or
m
Fasten suitable dowel into the rear wall.
Predirill the wooden beam.
m
TO protect the corners of the installation cavity, attach
Attach the wooden beam to the rear panel of the cavity.
the supplied protective brackets with adhesive tape.
7.
Preparing to connect the water
(only for appliances which require a water connection)
CAUTION
Turn off the main water tap to prevent damage caused
by leaking water.
m
Attach the connecting pipe to the shut-off valve
according to the instructions supplied by the
manufacturer of the ice maker installation kit.
m =
Install the connecting pipe. Always observe the
indicated gap dimensions to prevent damage to the
connecting pipe when pushing in the appliance.
m = Attach the connecting pipe to the floor with adhesive
tape.
16