Publicité
• Open the top panel (
• Insert the power supply cable (
• Inside the appliance, fix the power supply cable by threading it through the cable clamp (
screw).
• Connect the power supply cable to the terminal block inside the appliance as following.
power supply
Terminal block for single-phase power
• Carefully close the top panel.
10
) with a screwdriver (4 screws) to access the electrical terminal block.
) into one of the cable gland (
Accessing the electrical terminal block
Connect options
Connect to
(filtration pump,
power supply relay),
see"1.4 I Option
connections".
) on the rear part of the appliance.
Connect options
Connect
(filtration pump,
to power
power supply relay)
supply
Terminal block for tri-phase power supply
) (maintained with one
L: Live
N: Neutral
: Earth
Publicité
