Coffee Strength - Siemens TI 3 3 Série Mode D'emploi

en Operating the appliance
Notes
The drinks are prepared in two steps
■
(two grinding operations). Please
wait until the process is fully
completed.
If no button is pressed within 90
■
seconds, the appliance automatically
switches to the setting "Double
cup off".

Coffee strength

Before making a drink, you can adjust
the coffee strength:
To do so, touch % to select the
strength you require.
very mild
mild
regular
strong
very strong
only with TI305:
aromaIntense
The coffee strength selected is
Note:
then active for all drinks made with
coffee.
38
Filling level
You can adjust the filling level of your
drinks.
Press and hold espresso or caffe
crema for 3 seconds.
Dispensing takes place, with the button
selected flashing.
Progress is shown on the display:
Once the required filling level is
reached, touch the button selected to
stop. The new filling level is only
apparent after the next drink is
dispensed.
The filling level can be selected
Note:
either for Espresso (25 - 60 ml) or Caffe
crema (80 - 200 ml).A minimum
quantity is always brewed: Espresso
approx. 25 ml and Caffe crema
approx. 80 ml.
Frothing time
You can adjust the frothing time of your
drinks.
Press and hold cappuccino, latte
macchiato or milk for 3 seconds.
The milk is frothed up, and the button
selected flashes.
Progress is shown on the display:
Once the required frothing time is
reached, touch the button selected to
stop.
Setting the frothing time has no
Note:
impact on the amount of coffee.