Publicité
TINE REMOVAL
1. Remove the tine clips from each end of the tine shaft.
2. Slide the four tines off the shaft.
TINE INSTALLATION
1. Slide the inside tines onto each end of the tine shaft. One inside
tine is stamped with a (B) and the other is stamped with a (C).
2. Slide the outside tine (A) and tine (D) onto each end of the
shaft next. The tines should be installed in the correct order so
that they are positioned left to right ( A B C D ) as viewed from
the user's position on the cultivator. Make sure that the hub
collars on both the right and left pairs of tines face each other
so that there is adequate spacing between the tine blades. SEE
FIGURE 4
3. Insert the tine clips into the holes at each end of the tine shaft
to lock the tines into place.
NOTE: To reduce cultivating width, remove both outer tines
and reinsert tine clips through the two inner holes on the tine
shaft to secure both inner tines in place.
CULTIVATOR FEATURES:
8
Get parts online at www.getearthquake.com or call 800-345-6007 M-F 8-4:30 CST.
Spare Tine
Clips
60V
Battery
NOTE: Tines can be reversed so the pointed tip of the tines
are directed forward - for more aggressive digging. In this
arrangement, tines are positioned left to right D, C, B, A as
viewed from the user's position.
Removable
Tine Clip
D
C
Figure 4
Removable Tines
(Easy to remove
tine clips)
Battery
Lock Lever
Operator Manual
60V Cultivator
Tine Shaft
B
Variable Speed
Trigger (Built in
trigger safety)
Adjustable Wheels
(Transportation,
cultivating depth
adjustment, and
storage)
A
Publicité
