Publicité
SYSTEM SET UP
WARNING:
Electrical Shock Hazard When working with electrical connections, the
appliance and surrounding area should be clean and dry of any standing water
Failure to follow these instructions can result in death, fire, or electrical shock
1 Plug power cord into the wall outlet of your
home's electrical power system See page 4 for
electrical requirements
2 Turn on the cold water valve
3 Check all hoses to ensure no water
is leaking Tighten if necessary
4 Start your washer The status light should
illuminate blue after a few seconds
NOTE:
Your LaundryPure 2 0 will automatically turn
on and off as your washing machine starts, and stops
WARNING:
Electrical Shock Hazard Do no use an extension cord
Failure to follow these instructions can result in death,
fire, or electrical shock
Status Indicator Lights
9
Publicité
