Publicité
4.7 Parking Mode
Parking Mode operates as a sentry
function under different situations. To
activate Parking Mode, go to "Record
Setup"►"Parking Monitor", press OK and
select ON.
When the Parking Mode has been
turned on, and no movement is
detected in front of the camera after 5
minutes of recording, then Parking Mode
is activated. This is represented by an
icon (P) at the right side of the screen.
In Parking Mode, once the camera
detectsmovement at the front, it will start
auto- recording; it will stop recording
after 10 seconds of inactivity.
To manually activate Parking Mode,
press and hold the OK button until the P
icon appears on the screen.
The camera will exit Parking Mode if it
detects it has been moved.
NOTE: To ensure the camera is able to
function in Parking Mode, please keep it
powered with a mobile power bank or
hardwire it directly to the car battery. We
do not recommend running the camera
continuously for too long time.
- 16 -
OnDash S1
1920x1080P 30FPS
HDR
3
000MPH
00:00:08
2019/04/10
16:08:08
EV
0.0
OnDash S1
HDR
3
1920x1080P 30FPS
00:00:16
000MPH
2019/04/10
16:08:08
EV
0.0
Publicité
