Télécharger Imprimer la page

Technics SU-GX70 Manuel D'utilisation Fonctions De Base page 18

Amplificateur réseau audio
Masquer les pouces Voir aussi pour SU-GX70:

Publicité

Playback
Basic
Playing back music files on the
media server
You can share music files stored in the media
server (PC, Network Attached Storage, etc.)
connected to your home network, and enjoy the
contents with this unit.
1 Press [>INPUT<] repeatedly to select
"DMP".
• You can also select the input source by
turning the input selector knob on the unit.
• The server selection screen will be displayed.
2 Press [ ], [ ] to select a media
server on the network, and then
press [OK].
• The folder/content selection screen will be
displayed. Repeat this step to make further
selections.
• Folders/content may be displayed in
different order from the order on the server,
depending on its specifications.
3 Press [ ], [ ] to select an item and
then press [OK].
Note
• The connected server and its contents may
not be displayed properly depending on its
condition. (e.g. soon after adding the contents
to the server, etc.)
Please try again later. For details, refer to the
operating instructions of the device.
• The content may not be played back properly
depending on the network condition.
18
(18)
Listening to FM Radio
Storing FM stations
You can preset up to 30 channels for FM.
• A station previously stored is overwritten
when another station is selected for the same
channel by presetting.
1 Press [RADIO] repeatedly to select
"FM".
2 Press [MENU].
3 Press [ ], [ ] repeatedly to select
"Auto Preset" and then press [OK].
4 Press [ ], [ ] to select an item and
then press [OK].
Lowest:
To begin the auto preset with the lowest
frequency (87.9/87.5 MHz).
Current:
To begin the auto preset with the current
frequency.
• The tuner starts to preset all the stations it can
receive into the channels in ascending order.
• The factory default is "Lowest".
To listen to a preset FM channel
Press [MENU].
Press [
], [
] repeatedly to select "Tuning
Mode" and then press [OK].
Press [
], [
] to select "Preset" and then
press [OK].
Press [
], [
] or numeric buttons to
select the channel.

Publicité

loading