Technics SU-GX70 Manuel D'utilisation Fonctions De Base page 11

FM antenna connection
FM ANT terminal
Insert the antenna plug to be
connected all the way in.
FM indoor antenna (supplied)
• Tape the antenna to a wall or column at the
position with the least amount of interference.
Note
• The interference may occur if any electronic
devices are nearby.
Adhesive tape
(not supplied)
Connections
Connecting HDMI equipment
with ARC function (TV, etc.)
TV, etc.
• Use Premium High Speed HDMI cables when
connecting to peripheral devices.
• Connect this unit to the HDMI input terminal
which has ARC (Audio Return Channel)
function.
• Set the audio output from TV speakers to Off.
For details, refer to the operating instructions
of the TV.
Note
• Linear PCM signal is only available for ARC
function.
• Do not input the signals other than linear PCM
signal, otherwise it may cause noise or damage
the connected speakers.
• For the equipment does not support ARC
function, connect the equipment with HDMI
cable (not supplied) and optical digital audio
cable (not supplied) to the optical digital input
terminal (OPT2) of this unit.
• To provide the higher quality sound, select
"On (Custom)" of "Pure Amplification" from
the setup menu and set "Network/USB-A/
Bluetooth" to "Disabled" to disable the
network functions. ( 12)
• The volume may be lower depending on the
connected TV.
Basic
HDMI cable
(not supplied)
11
(11)