Jimmy JV83 Mode D'emploi page 5

Packing List
Handheld Vacuum
Part Name
Cleaner
Quantity 1
Part Name Metal Tube
Quantity 1
Part Name Strench Hose
Quantity 1
Main-body Assembly
Connect the electric floor head with metal tube
Hold the floor head with left hand, use right hand
to insert the metal tube vertically into floor head,
align with the conductive needle, press the handle
until a "click" sound is heard.(Picture 1)
Note: Keep the handle and floor head in the same
direction, conductive needle shall align with the socket.
Charging base assembly
Fix the charging base on wall through screw holes,
so that the handheld vacuum cleaner can be
placed.(Picture 2)
Assemble battery pack and handheld vacuum
Cleaner
Battery pack assembly: use one hand to hold
handheld vacuum cleaner, one hand to hold
battery pack, align with the guide-track groove,
then install the battery pack until the "click" sound
is heard. Pull hard the battery pack downwards, if
the batter pack remain tight, which means battery
pack assembly complete.(Picture3)
Note: Please disassemble the battery pack from the
machine when the vacuum cleaner is not used for a long
time.Pack the machine and store in dry place, avoiding
direct sunlight or humid environment.
Electric Floor Electric Mattress
Head Head
1
Adaptor Battery Pack
1
Charging Base Instruction Manual
1
Electric Floor
Head
Screw Hole
3
2-in-1
Upholstery
Tool
1 1
Soft Brush
1 1
Screws
1 2
1.
Metal Tube
2.
Guide-track groove
3.
Battery pack
2-in-1 crevice tool
1
Connectorl
1
Expansion Hos
2
Conductive
Needle
Charging base
groove