Publicité
Press and hold down switch (1.).
To lock into position, hold down the locking
button and release the switch (2.).
To switch off, briefly press and release
the switch.
Preselecting the speed
To set the operating speed, move the dial
to the required value.
Gently press the switch to accelerate the
power tool up to the preselected speed.
CAUTION!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
NOTE
In the event of overload or overheating in
non-stop operation, the power tool will
switch off.
To continue working, switch the power tool
off and back on again.
20
Operating instructions
NOTE
When the power tool is switched off, the tool
continues running briefly.
If using a polishing paste, use the respective
tool for each paste.
Sponges can be washed in the washing
machine.
For further information on the manufacturer's
products go to www.flex-tools.com.
Maintenance and care
WARNING!
Remove the battery before carrying out any
work on the power tool.
Cleaning
Clean the power tool and grille in front of
the vent slots regularly. Frequency of
cleaning is dependent on the material
and duration of use.
Regularly blow out the housing interior
and motor with dry compressed air.
Regularly clean the filter cover.
Remove filter cover and blow it out with
dry compressed air.
Gears
NOTE
Do not completely remove the handle cover
during the warranty period.
Non-compliance will deem the guarantee
obligations of the manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
PE 150 18-EC
Publicité
